FoxHeader1

FOX SERVICE / TECH | FOX UPGRADES | FOX SPARES

 


Cyclinic is passionate about suspension, and with our state of the art workshop facility, we have the tools and parts required to service your Fox fork/shocks in a clean and sophisticated environment. Our suspension technicians are highly experienced in working with suspension, and it is our focus to make sure you or your customer are getting the best possible performance out of it. Please see our service options further below, and contact us with any questions about upgrades, servicing or spares. Prices shown below are approximate, include any genuine spare parts used, and any postage or removal/fitting. Bike Shops – Please contact us for dealer pricing.


FOX RACING SHOX – FORKS


General SERVICE – From $145-$179

Average service pricing: FOX 32mm from $179, Fox 34 from $185, Fox 36 from $199, Fox 40 from $219)

A general fork service includes: Disassembly of fork, removing the old dust wiper seals and foam rings, oil damper, air spring and top caps. Condition inspection and quote on repair cost if requested. Extensive clean of lowers and CSU (Crown steerer unit) before new FOX low friction dust wiper seals and foam rings are installed. Replace seals in open bath (or open chamber) damper, replace air seals, and rebuild fork with fresh Fox fluids before fork is inflated using nitrogen. Test fork for full functionality on the dyno, and complete a pressure retaining test prior to completion/return. Price includes postage (both ways) Australia wide, or removal/installation from the bike if you’re dropping it in.


FULL SERVICE – From $179-$259 

A full fork service includes: Disassembly of fork, removing the old dust wiper seals and foam rings, oil damper, air spring and top caps. Condition inspection and quote on repair cost if requested. Extensive clean of lowers and CSU (Crown steerer unit) before new FOX low friction dust wiper seals and foam rings are installed. Test lower leg bushings for wear, and replace if necessary. Replace all oil seals in FIT damper, and air spring assembly, and rebuild fork with fresh Fox fluids before fork is inflated using nitrogen. Test fork for full functionality on the dyno, and complete a pressure retaining test prior to completion/return. Price includes postage (both ways) Australia wide, or removal/installation from the bike if you’re dropping it in.


FOX RACING SHOX – REAR SHOCKS


AIR CAN SERVICE – FROM $85-$100  

A basic shock service includes: Disassembly of air can, removing the old air and wiper seals. Condition inspection and quote on repair cost if requested. Extensive clean of air can and damper shaft unit before new FOX air sleeve seals are installed. Rebuild shock with fresh Fox Float fluid. Install brand new genuine Fox DU eyelet bushes then shock air can is inflated using nitrogen. Test for full function and pressure loss prior to completion/return. Price includes postage (both ways) Australia wide or removal/installation from the bike if you’re dropping it in.


Fox Coil FULL SERVICE – $179.00 

*Fox Float FULL SERVICE – $189.00 

Fox Brain / Fox Dyad FULL SERVICE – $279.00 

A full shock service includes: Disassembly of air can, removing the old air and wiper sealsCondition inspection and quote on repair cost if requested. Extensive clean of air can before new FOX air sleeve seals are installed. Discharge nitrogen from shock, and deconstruct oil damper removing all old seals and oil. Replace all internal damper and boost valve seals, and inspect damper elements such as shim stack, boost valve, rebound shaft and knob assembly for any wear and proper function. Rebuild shock with fresh Fox fluids, and charge IFP with nitrogen to factory or customer specification. Install brand new genuine Fox DU eyelet bushes then shock air can is inflated using nitrogen. Dyno test for full function and pressure loss prior to completion/return. Price includes postage (both ways) Australia wide or removal/installation from the bike if you’re dropping it in.  

*$189 – All Float shocks. Flat rate servicing applies to all Fox Float rear shock models. Flat rate services do not include the replacement of worn or damaged damper shafts, body’s, or pistons. These items may rarely require replacement, however if they do – we will contact you to discuss the best options and costs.


Service prices are indicative only, and may differ up or down depending on the condition of your Fork or Shock. We will happily provide an obligation free quote on any service once we have seen the fork/shock’s condition at our workshop. Local customers – The fork/shock can be left on your bike when it is dropped off for service. 


FAQ:

Q: What is the procedure for sending my fork/shock to you for a service or service quote? 

A: You can book your fork/shock in for service using our simple online booking form here: Once your booking is completed, you will be able to download your free delivery label online (or via the confirmation email) which is ready for you to print, attach to the parcel and drop off the items at your local Australia Post outlet, or in a RED street side post box. If you prefer to drop off at our workshop, just book online and or just bring it in when convenient. On or off the bike is fine – There are no additional charges for bringing it on on the bike.

Once your fork/shock is received and inspected, we will contact you with the repair quote if requested, and carry out the necessary repairs within 24-48hrs. You will then be emailed all the service information including what was done, what parts were used, how long it took and how to make payment.

Q: What is carried out in a typical service by Cyclinic? 

A: Each service at Cyclinic begins with a thorough inspection and test of the fork/shocks condition. We then clean the fork/shock, and release any air pressure. Next up, we remove the lowers or the air can, and deconstruct, dumping all the old oil and seals. All components are then cleaned using an exclusive isopropyl formula, inspected for damage or wear and we then complete the service quote if required. ALL seals are replaced and the fork or shock is rebuilt with new high performance suspension fluid. The fork or shock is then inflated to customer’s recommended pressure using nitrogen. The fork or shock’s function is checked, and is tested for any air loss over a 12hour minimum testing period before getting boxed and prepped for sending home to its owner.

Q: What is the turnaround time for services?

A: Most Fox fork and shock services are completed, tested and ready for return within 48hrs of arriving at our workshop. Some more extensive services may take an extra day or two at most.

Q: Do you offer a warranty on service work?

A: Yes, we provide a 3 month service warranty from date of service. This warranty is subject to our discretion and may not cover your recently serviced fork if it is subject to wear or misuse.

Q: Do you service all Fox mtb Shocks?

A: YES! We service all Fox shocks including all of your Float and Vanilla series, Trek’s ‘DRCV’, Scott’s ‘Nude’, Fox Specialized models including the Brain, and Triad, plus we now also service Cannondale’s DYAD rear shock!